检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:施鸿谋 林福娣 苏一帆 范超春 赵岩 张娜[1] SHI Hong-mou;LIN Fu-di;SU Yi-fan;FAN Chao-chun;ZHAO Yan;ZHANG Na(School of Chemical Industry,Huaqiao University,Xiamen 361021,China)
出 处:《食品工业科技》2020年第16期188-196,231,共10页Science and Technology of Food Industry
基 金:华侨大学研究生科研创新能力培育计划资助项目;福建省高校产学合作重大科项目(2018N5008)。
摘 要:以羟丙基甲基纤维素-普鲁兰多糖为主要成分,κ-卡拉胶作为凝胶剂,研究不同组成对复合膜性能的影响,以确定最佳配方。基于单因素实验,对复合膜的配方通过响应曲面法进行优化设计,确定最佳制备工艺为:普鲁兰多糖含量9.533%,羟丙基甲基纤维素含量6.000%,κ-卡拉胶含量2.315%,甘油含量7.903%。在此条件下,经过实验测试,所得到的复合膜断裂伸长率为56.35%±1.48%,抗拉强度为(2.68±0.39) MPa,凝胶强度为(785.48±10.32) g/cm^2,透光率为46.73%±3.87%。实验验证结果与理论值相近,响应面优化所得结果对于复合膜实际生产和深入研究具有一定的指导意义。Using the HPMC-Pulullan as the main component and the κ-carrageenan as the gelling agent,the influence of different composition ratios on performance indicators was investigated,and then the optimum formula was to be determined. According to the single-factor experiments,the formula design of the composite film was optimized by using the response surface methodology,and then the best preparation process was determined:The contents of pullulan was 9.533%,the contents of HPMC was 6.000%,the contents of κ-carrageenan was 2.315%,and the contents of glycerol was 7.903%. Under these conditions,the experimental results showed that the elongation at break of composite membrane was 56.35%±1.48%,the tensile strength was(2.68±0.39) MPa,the jelly strength was(785.48±10.32) g/cm^2,and the light transmittance was 46.73%±3.87%. The experimental verification results were basically consistent with the theoretical values. Therefore,the results obtained by response surface optimization show certain guiding significance for the actual production and in-depth research of composite membrane.
关 键 词:羟丙基甲基纤维素 多糖 复合膜 植物软胶囊 响应曲面法
分 类 号:TS201.1[轻工技术与工程—食品科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229