检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:彭晨睿 郭润楠 陶洪琪[1] 余旭明[1] PENG Chenrui;GUO Runnan;TAO Hongqi;YU Xuming(Science and Technology on Monolithic Integrated Circuits and Modules Laboratory,Nanjing Electronic Devices Institute,Nanjing,210016,CHN)
机构地区:[1]南京电子器件研究所,微波毫米波单片集成和模块电路重点实验室,南京210016
出 处:《固体电子学研究与进展》2023年第1期21-26,共6页Research & Progress of SSE
基 金:国家重点研发计划资助项目(2019YFB2203703)。
摘 要:提出了一种毫米波Doherty放大器一体化匹配网络的设计方法。该匹配网络将功率合成、阻抗变换和相位调节功能一体化,结合兰格耦合器,去除了传统Doherty功放结构中输出和输入四分之一波长线。采用0.15μm GaN工艺研制了一款Doherty放大器MMIC。连续波测试条件下,此放大器在38~42 GHz频段内,饱和功率达到40 dBm,饱和PAE大于24%,6 dB输出功率回退PAE达到16%。在中心频率40 GHz、20 MHz双音间隔测试条件下,输出功率回退3 dB时,放大器的三阶交调失真IMD3小于-21 dBc。A design method of integrated matching network was proposed for millimeter-wave Doherty power amplifier(DPA)in this paper.The proposed matching network integrated the power combing,impedance transformation and phase offsetting functions together,and combined with Lange coupler to remove the quarter wavelength transmission-line of output and input in the traditional DPA structure.A DPA MMIC had been designed and fabricated on 0.15μm GaN HEMT technique.Under continuous wave test condition,the saturated power of this amplifier reaches 40 dBm,the saturated PAE is more than 24%,and the 6 dB output power back-off PAE is 16%over 38-42 GHz.Under the condition of two tone test with center frequency of 40 GHz and interval of 20 MHz,the third-order intermodulation distortion(IMD3)of the amplifier is less than-21 dBc at 3 dB output power back-off.
关 键 词:DOHERTY功率放大器 单片微波集成电路 氮化镓 负载调制
分 类 号:TN722[电子电信—电路与系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.224.212.19