带缆水下机器人系统水动力混编算法设计  

Design of hydrodynamic hybrid algorithm for tethered underwater robot system

作　　者：陈东军 吴家鸣[2] CHEN Dongjun;WU Jiaming(Department of Architecture Engineering,Yangzhou Polytechnic Institute,Yangzhou 225127,China;School of Engineering Civil and Transportation,South China University of Technology,Guangzhou 510640,China)

机构地区：[1]扬州工业职业技术学院建筑工程学院,江苏扬州225127 [2]华南理工大学土木与交通学院,广东广州510640

出　　处：《舰船科学技术》2025年第3期101-110,共10页Ship Science and Technology

基　　金：国家自然科学基金资助项目(51979110);江苏省高等学校基础科学(自然科学)重大研究项目(23KJA560008)。

摘　　要：为深入探究带缆水下机器人系统水动力与控制力的关系,设计一种水动力混编计算方法。首先引入脐带缆和水下机器人控制方程组,将机器人运动过程中合外力与脐带缆张力、螺旋桨推进力以及机器人主体水动力关联起来;其次设计收放脐带缆和调节螺旋桨转速的控制程序,最后将系统方程组求解程序、控制程序和水动力计算模块三者混编,形成水动力与控制力交互耦合计算方法。仿真计算结果表明,纵摇角、横摇角以及淹没深度仿真值与实验值误差分别为1°、0.5°和-50 mm;PID算法延迟对前馈调节机制产生影响,收放缆最大相对误差为15%,轨迹跟踪最大误差0.3 m。A hybrid calculation method for hydrodynamic forces was designed to explore the relationship between hy-drodynamic and control forces of tethered underwater robot system.Firstly the governing equations of umbilical cable and the underwater robot are introduced with relating the umbilical cable tension,propulsion from control propellers and the hy-drodynamic loads on the robot body during the underwater robot moves.Then control programs of adjusting the umbilical cable length and regulating the rotating speeds of propellers are designed;finally the coupling interactive algorithm of mix-ing the equation solving program,the control program and the hydrodynamic calculation module is integrated.The simula-tion results shows that the errors about pitch,roll and submerged depth between numerical and experimental are 1°,0.5°and-50 mm respectively.The maximum relative error of adjusting the cable length is about 15%which affected by the delay of PID algorithm and the maximum absolute error of trajectory tracking is 0.3 m.

关 键 词：水下机器人 水动力仿真 轨迹跟踪 算法设计 运动控制 

分 类 号：U661.1[交通运输工程—船舶及航道工程]