相关期刊:《Asian Journal of Pharmaceutical Sciences》《Acta Metallurgica Sinica(English Letters)》《Journal of Wuhan University of Technology(Materials Science)》《International Journal of Minerals,Metallurgy and Materials》更多>>
financially supported by the National Natural Science Foundation of China(No.11475118)。
In this work,an ultrafine-grained high-Nb-TiAl alloy with a nominal composition of Ti-45Al-8Nb-0.2W-0.2B(at%)was prepared by cryomilling and subsequent spark plasma sintering(SPS)technique.The chemical composition,par...
Milling involves the application of mechanical energy to physically break down coarse particles to finer ones and is regarded as a“topedown”approach in the production of fine particles.Fine drug particulates are esp...
Supported by the National Natural Science Foundation of China(No.51202171);the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20120143120004);the"111"Project(No.B13035)
The surface passivation mechanism of nanocrystalline silicon powder was studied. The liquid nitrogen/argon was used as the medium to prepare the nanocrystalline silicon powder, using a cryomilling technology. The X-ra...
Project(2002AA302502)supported by the Hi-tech Research and Development Program of China;Project(20050008016)supported by the Research Fund for the Doctoral Program of Higher Education,China
Nanocrystallized Al-10.0%Zn-3.0%Mg-1.8%Cu(mass fraction)alloy powder was prepared by cryomilling,and then the nanostructured powder was consolidated into bulk material by spark plasma sintering(SPS).The microstructura...
supported by the National High-Tech Research and Development Program of China (No.2002AA331080)
Nanocrystalline NiCrC alloy powders with a qualified particle size distribution for thermal spraying were synthesized using the cryogenic ball milling (cryomilling) method. The morphology, microstructure, size distr...
the National High Technology Research and Development Program of China (No.2002AA331080)
Thermal stability of nanostructured NiCrC coating prepared by high velocity air-fuel (HVAF) spraying of cryomilled feedstock powders was investigated. Transmission electron microscopy (TEM), differential scanning ...
This work was financially supported by the National High-Tech Research and Development Program of China ("863" Program) (No.2002AA302502)
Bulk nanocrystalline Al was fabricated by mechanically milling at cryogenic temperature (cryomilling) and then by hot pressing in vacuum. By using X-ray diffraction (XRD), scanning electron microscopy (SEM), and...
This project was financially supported by the High Technical Research and Development Programme of China (No. 2002AA302502).
NanocrystaUine Ni powders were successfully fabricated by mechanically milling at cryogenic temperature (cryomilling) with 1 wt.%Y2O3 particles. The experimental results have shown that the Ni grain size is reduced ...
This work was supported by the National natural Science Foundation(No.50371027);the team project from Natural Science Foundation of Guangdong Province and Natural Science Foundation of Fujian Province(No.E0440001).
The cryogenic milling and milling in conjunction with dielectric barrier discharge plasma (DBDP) have been separately set up. The combined effect of low temperature and plasma on ball milling has been investigated by ...