supported by the National Natural Science Foundation of China(No.52275441);the Shenzhen Science and Technology Program(No.KJZD20230923114606013).
Cemented carbide tools are widely utilized in titanium alloy machining.However,severe tool wear usually occurs during machining;thus,the wear process has attracted widespread attention.Electromagnetic treatment was ap...
supported by the National Key Research and Development Program of China(No.2017YFB1103900);the National Natural Science Foundation of China(No.51605340)。
A numerical model is presented in this article to investigate the interactions between laser generated ultrasonic and the microdefects(0.01 to 0.1 mm),which are on the surface of the laser powder bed fusion additive m...
As a virtual experimental device for analysis and calculation of grown-in microdefects formation in undoped silicon dislocation-free single crystals the software is proposed. The software is built on the basis on diff...
Project(50361002) supported by the National Natural Science Foundations of China;Project(0448006) supported by the Natural Science Foundation of Guangxi Province,China
The microdefects and free electron densities in B2,R and B19’ phases of Ni50.78Ti49.22 alloy were studied by positron lifetime measurements.Comparing the lifetime parameters of the Ni50.78Ti49.22 alloy measured at 29...
Positron lifetime spectra have been measured in binary Ni Al alloys with different chemical composition and NiAl alloys doped with Cr, Zr, Fe and Mg. The results indicate that in B2 NiAl and Ll 2 Ni 3Al alloys, some o...
Project supported by the National Natural Science Foundation of China (Grant No. 19632030).
Under the action of external loads, the critical condition of fracture in ductile materials is closely related to the strong interactions among internal microdefects at the later stage of deformation. By means of Riem...
NiAl alloy is considered to be a good candidate material for high performance, high-tempera-ture structural applications since this material offers a wide range of attractive mechanical andphysical properties, such as...
The microdefects in Te-rich PbTe coating material grown by Bridgman technique have been studied via transmission electron microscopy.The results indicate that the major microdefects in Te-rich PbTe crystal are plate-l...
Project supported by the National Natural Science Foundation of China.
The long-range ordered intermetallic compounds FeAl alloys with B2 crystalstructure are characterized by superior high-temperature strength, excellent oxidation re-sistance, low density and low cost, so that they are ...
Ⅰ. INTRODUCTION We have discussed the optical processing and the enhancement of electron microscopic images consisting of a periodic structure.The technique described in the previous papers is only available for proc...