YOK(MEVLANA 2018-9999-Proj-ect-Based International Exchange Programme)for financial support in inter-national collaboration.
Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its applications.One approach to overcome this limitation is the addition of secondary phases into boron carbide...
“Solid Waste Recycling”Key Project of National Key R&D Plan of China(No.2018YFC1901700);the Fundamental Research Funds for the Central Universities of China(Nos.JZ2021HGTB0094 and PA2021GDGP0059)。
Mo-5Ta targets were prepared by the spark plasma sintering(SPS)technology under the sintering temperatures of 1400-1600℃,the holding times of 0-20 min,and the axial pressure of 30 MPa.The microstructure,performance,a...
the Open Subject of The State Key Laboratory of Heavy Duty AC Drive Electric Locomotive Systems Integration(No.172195100710)。
Copper-graphite composites were prepared by spark plasma sintering(SPS)using coppercoated graphite powder.Hydrophobic surfaces were successfully constructed by chemical etching and surface treatment.The density,metall...
the Shanxi Key Laboratory of Nano-materials and Technology,China(Nos.18JS060,17JS075)。
A hypereutectic Al-50 wt%Si alloy for electronic packaging was prepared by spark plasma sintering(SPS)technology using gas-atomized Al-50 wt%Si powder.The effect of sintering parameters on alloy phase composition,micr...
Funded by the National Natural Science Foundation of China(Nos.52071117,51771063);the Heilongjiang Provincial Science Fund for Distinguished Young Scholars(No.JQ2021E002)
Three groups of AlSiTiCrNiCu high entropy alloy(HEA)particles reinforced Al606l composites were fabricated by spark plasma sintering at 520 and 570℃(S520,S570)and by hot-pressed sintering at 570℃(H570).The AlSiTiCrN...
Supported by National Natural Science Foundation of China(Nos.91226202,91426304);CAS Interdisciplinary Innovation Team Project
The spark plasma sintering(SPS) method was used to study the mechanism of reaction interface between Zr and Ti3AlC2 with electric current going through it. It was found that electric current greatly reduced the bond...
Funded by the National Natural Science Foundation of China(Nos.51171014 and 51210001)
Two kinds of simulated concrete pore solutions(SPSs) were treated with different amounts of synthetic calcium silicate hydrate(C-S-H). The variation of the [Cl^-]/[OH^-] ratio in SPS was measured and the corrosion...
Funded by the National Natural Science Foundation of China(21273192);the Foundation of He’nan Educational Committee(15B430009);the Key Scientific Research Foundation of Xuchang University(2014077)
To acquire a well bonded interface between the copper and the diamond particles in diamondcopper matrix composites, an available process to apply a vapor deposited aluminum(Al) coating onto diamond particles was use...
Funded by the National High-tech Research and Development Program of China (2008AA031103);the Scientific and Technical Project of Sichuan Province (07GG002-006)
The precursor with TiC0.7N0.3@WO3-MO3 microspheres were prepared by a novel method from the WO3-MoO3 sol dipping. Subsequently, TiC0.7N0.3@WC-MoC2 core-shell structural microspheres were successfully obtained by carbu...
Funded by the Program for Innovation Team in Hubei Province(No.2008CDA011)
Various parameters in spark plasma sintering(SPS),such as sintering temperature,holding time,heating rate,and pressure,were adopted to investigate their effects on the densification of pure SnO2 power.The obtained e...