云南高校图书馆联盟文献共享服务平台- TI-6AI-4V

TI-6AI-4V: 作品数：19被引量：53H指数：4; 导出分析报告; 相关领域：一般工业技术金属学及工艺更多>>; 相关作者：张相琴张雪萍吕祥鸿马志军杨延清更多>>; 相关机构：上海交通大学西北工业大学南昌航空工业学院南京航空航天大学更多>>; 相关期刊：《Frontiers of Materials Science》《Acta Metallurgica Sinica(English Letters)》《Journal of Materials Science & Technology》《制造技术与机床》更多>>; 相关基金：国家自然科学基金国家重点基础研究发展计划天津市应用基础与前沿技术研究计划中国博士后科学基金更多>>

TiN涂覆的 Ti-6Al-4V注入Cu^(2+)后的抑菌性与细胞相容性研究被引量：1: 《中国生物医学工程学报》2019年第2期208-215,共8页褚珊珊万荣欣吕晓飞顾汉卿彭诚; 国家重点研发计划课题(2016YFC1100300);国家高技术研究发展计划(863计划)(2015AA034702);天津市应用基础与前沿技术研究计划(重点项目)(15JCZDJC3820); 在TiN涂覆的Ti-6Al-4V表面分别注入一定剂量的Cu^(2+)或Ag^+,研究并对比所注入表面的抑菌性和细胞相容性。将L929细胞分别接种于4种材料上:空白对照组——Ti-6Al-4V(钛合金组),阴性对照组——TiN涂覆的Ti-6Al-4V(TiN组),阳性对照组——...; 关键词：TiN涂覆 TI-6AI-4V MEVVA离子注入 Cu抑菌性细胞相容性

Microstructure and inclusion of Ti-6AI-4V fabricated by selective laser melting: 《Frontiers of Materials Science》2016年第4期428-431,共4页Qianli HUANG Ningmin HU Xing YANG Ranran ZHANG Qingling FENG; Selective laser melting （SLM） was used in fabricating the dense part from pre-alloyed Ti-6Al-4V powder. The microstructural evolution and inclusion formation of as-fabricated part were characterized in depth. The mi...; 关键词：metals and alloys laser processing MICROSTRUCTURE INCLUSION

Phase composition, morphology and element contents of micro-arc oxidation ceramic coatings on Ti–6Al–4V alloy under different calcination conditions被引量：3: 《Rare Metals》2016年第11期836-840,共5页Guo-Dong Hao Xue-long Hao Zu-Fang Zhu; financially supported by the Postdoctoral Science Research Developmental Foundation of Heilongjiang Province (No. LBH-Q12004);the Education Department Foundation from Heilongjiang Province (No.11521575);the Science and Technology Project of Mudanjiang, Heilongjiang Province, China (No.G2012g0008); Compound ceramic coatings with the main crystalline of Al_2TiO_5（in the as-prepared coating without treatment） were prepared in situ on the surface Ti-6Al-4V alloy by means of pulsed bipolar micro-arc oxidation in N...; 关键词：Micro-arc oxidation TI-6AI-4V ARGON High-temperature oxidation

Specific heat treatment of selective laser melted Ti-6AI-4V for biomedical applications被引量：7: 《Frontiers of Materials Science》2015年第4期373-381,共9页Qianli HUANG Xujie LIU Xing YANG Ranran ZHANG Zhijian SHEN Qingling FENG; Acknowledgements The authors are grateful for the financial support from the National Natural Science Foundation of China （Grant Nos. 51361130032 and 51472139） and the Doctor Subject Foundation of the Ministry of Education of China （Grant No. 20120002130002）.; The ductility of as-fabricated Ti-6AI-4V fails far short of the requirements for biomedical titanium alloy implants and the heat treatment remains the only applicable option for improvement of their mechanical propert...; 关键词：titanium alloy selective laser melting （SLM） heat treatment microstruc-ture mechanical property

Behaviors of interfacial elements during the brazing of SiO2 glass ceramic to Ti-6AI-4V with AgCu/Ni interlayer: 《China Welding》2015年第2期18-24,共7页刘多周利唐冬雁陶戢冯吉才; This work was supported by National Natural Science Foundation of China （Grant No. 51505105） and Natural Science Foundation,of Shandong Province （ Grant No. ZR2014EEQ001 ）.; AgCu/Ni composite interlayer was used to join SiO2 glass ceramic to Ti-6AI-4V alloy successfully, obtaining the largest joint shear strength 110 MPa. Ag, Cu and Ni in the interlayer and Ti in the Ti-6AI-4V alloy affec...; 关键词：CERAMIC titanium alloys BRAZING interface

TI-6AI-4V裂纹缺陷荧光渗透检测研究被引量：1: 《制造技术与机床》2015年第6期117-120,共4页陈振亚沈兴全杨承昌陈薇; 国家自然基金项目(51175482);山西省研究生优秀创新项目(20133099);中北大学研究生科技基金(20131007); 阐述了荧光渗透检测TI-6AI-4V裂纹缺陷的原理,给出了缺陷宽度和缺陷深度公式。研究了荧光渗透检测的工艺过程,通过对TI-6AI-4V裂纹缺陷的试验分析,表明结构曲率变化过大处是产生裂纹缺陷的区域。对TI-6AI-4V裂纹缺陷的产生原因做了理论...; 关键词：TI-6AI-4V 裂纹缺陷荧光渗透检测切削深度

Effect of Heat Treatment on Cu Distribution,Antibacterial Performance and Cytotoxicity of Ti-6Al-4V-5Cu Alloy被引量：14: 《Journal of Materials Science & Technology》2015年第7期723-732,共10页Zheng Ma Ling Ren Rui Liu Ke Yang Yu Zhang Zhenhua Liao Weiqiang Liu Min Qi R.D.K.Misra; financial supports from the National Basic Research Program of China(No.2012CB619101);the National Natural Science Foundation of China(No.81271957);the Basic Research Project of Shenzhen City(No.JCYJ20120616142847342); A copper-bearing Ti-6Al-4V-5Cu alloy was processed and subjected to different heat treatments to explore the relationship among microstructure, antibacterial performance, and cytocompatibility. Characterization of mic...; 关键词：Ti-6AI-4V-SCuHeat treatmentMicrostructureAntibacterial performanceCytocompatibility

Identification and evolution of interfacial structure of SiO2 glass ceramic/Ti-6AI-4V alloy joint bonded with AgCu/Ni interlayer被引量：1: 《China Welding》2014年第3期37-41,共5页刘多王美荣唐冬雁马蔷冯吉才; This work was supported by National Key Science and Technology Special Projects （2014ZX04001131）, Natural Scientific Research Innovation Foundation in Harbin Institute of Technology （HIT. NSRIF. 201119） and China Postdoctoral Science Foundation （2013M541367）.; AgCu/Ni composite interlayer was utilized to join SiO2 glass ceramic （74. 52% SiO2-23. 40% Al2 03 -2. 08 % K2 O, wt. % ） and Ti-6Al-4V alloy by eutectic reaction. Interface structures of the joints were identified b...; 关键词：CERAMIC Ti-6Al-4V alloy reaction joining microstructure interface

A Theoretical Processing Map for Laser Cladding： Experimental Validation with Laser Cladding of Ti-6AI-4V Powder on a Ti-6AI-4V Substrate: 《Journal of Physical Science and Application》2013年第5期287-294,共8页Ryan Cottam Tim Barry Milan Brandt; A theoretical processing map for the laser cladding of Ti-6AI-4V powder on a Ti-6AI-4V substrate was developed. The map was constructed with the aid of a new analytical model for laser cladding, which is detailed in t...; 关键词：Laser cladding TI-6AI-4V process modeling processing map.

Ti6A14V钛合金高速切削试验与有限元建模被引量：10: 《机械设计与研究》2012年第4期92-96,100,共6页张相琴张雪萍 A.K.Srivastava; 国家自然科学基金资助项目(51175331); 综合考虑刀具圆角影响的Merchant模型和高速正交切削Ti6AI 4V实验测量的切削力和切屑几何参数,解析求得了"切屑-刀具-工件"摩擦系数。计算表明"刀具-工件"摩擦系数约为"刀具-切屑"摩擦系数的3～7倍,该研究克服了现有文献中对"切屑-刀具...; 关键词：TI-6AI-4V 高速干切削摩擦系数有限元分析

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

TI-6AI-4V

检索结果分析

下载全文

高级检索检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

TI-6AI-4V

检索结果分析

下载全文

用户登录

高级检索检索式检索