3Y-TZP

作品数:97被引量:209H指数:7
导出分析报告
相关领域:化学工程医药卫生更多>>
相关作者:李国华石连水龚振宇邵龙泉李建军更多>>
相关机构:哈尔滨工业大学清华大学南昌大学中国科学院更多>>
相关期刊:更多>>
相关基金:国家自然科学基金国家高技术研究发展计划博士科研启动基金北京市优秀人才培养资助更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Preparation of Fine-grained 3Y-TZP Ceramics with Enhanced Low-temperature Degradation Resistance
《Journal of Wuhan University of Technology(Materials Science)》2025年第2期368-373,共6页XIONG Yan LUO Lian CHEN Liu JIANG Bo LIU Zhi LIU Qi 
financially supported by the Foundation of Hubei Province Key Laboratory of Green Materials for Light Industry,Hubei University of Technology。
The occurrence of tetragonal to monoclinic phase(t→m)transformation in zirconia ceramics under humid ambient conditions induces the low-temperature degradation(LTD).Such t→m transformation could be suppressed by gra...
关键词:3Y-TZP ceramics low-temperature degradation MICROSTRUCTURES 
Femtosecond laser ultrafast photothermal exsolution
《International Journal of Extreme Manufacturing》2024年第5期207-219,共13页Lurun Xu Jingchao Tao Zhuguo Li Guo He Dongshi Zhang 
financially supported by Shanghai Pujiang Program 23PJ1406500.
Exsolution,as an effective approach to constructing particle-decorated interfaces,is still challenging to yield interfacial films rather than isolated particles.Inspired by in vivo near-infrared laser photothermal the...
关键词:EXSOLUTION ultrafast quenching femtosecond laser ablation photothermal therapy 3Y-TZP ceramics thermal annealing 
Nb_(2)O_(5)对3Y-TZP陶瓷性能影响的研究
《中国锰业》2024年第2期47-49,61,共4页林信平 李和祯 陈戈 
研究了Nb_(2)O_(5)的加入对3Y-TZP陶瓷性能的影响,主要包括对硬度、韧性、冲击性的影响,并且结合显微形貌以及XRD物相图谱分析出的晶轴比进行分析。结果表明,随着Nb_(2)O_(5)添加量的增加,陶瓷的韧性呈现提升趋势,硬度呈现降低趋势,强...
关键词:3Y-TZP Nb_(2)O_(5) 异相颗粒增韧 晶轴比 
Defects in the grain interiors of 3 mol%yttria-stabilized tetragonal zirconia polycrystal ceramics with 0.25 wt%alumina
《Journal of Advanced Ceramics》2024年第4期469-477,共9页Yan Xiong Lian Luo Yao Cheng Zhi Liu Qi Liu Weimin Wang Wei Ji 
the National Key R&D Program of China(No.2021YFB3701400);the National Natural Science Foundation of China(Nos.92163208 and 52322207);the Foundation of Hubei Province Key Laboratory of Green Materials for Light Industry,Hubei University of Technology.
The presence of high-density defects is rarely observed in bulk 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TZP)ceramics obtained through conventional pressureless sintering.In the present work,fine-gra...
关键词:3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TzP)ceramics alumina addition microstructure defect 
Effect of grain boundary segregation on aging resistance and mechanical properties of tetravalent element-doped 3Y-TZP ceramics for dental restoration
《International Journal of Smart and Nano Materials》2023年第2期170-188,共19页Bin Deng Rongfang Zou Yang Huang Lu Feng Yanru Chen 
In the humid oral environment,3Y-TZP ceramics always suffer from low-temperature degradation(LTD)for a long time,which results in the degradation of mechanical properties and catastrophic failure.The low-temperature d...
关键词:3Y-TZP low-temperature degradation grain boundary segregation mechanical properties GeO_(2) 
Effects of BN content on the mechanical properties of nanocrystalline 3Y-TZP/Al_(2)O_(3)/BN dental ceramics被引量:1
《International Journal of Minerals,Metallurgy and Materials》2021年第11期1854-1860,共7页Lei Zhou Yan-fang Zhang Pan Yi Ying Wen Chao-fang Dong Li-min Meng Se-fei Yang 
financially supported by the National Natural Science Foundation of China(No.81371183).
3Y-TZP/3wt%Al_(2)O_(3) powder was coated with varying amounts of BN using the urea and borate reaction sintering method,and then multiphase ceramics were prepared by hot pressing sintering.The micro-topography and the...
关键词:multiphase ceramic boron nitride mechanical properties reaction sintering method 
二次搅拌分离对鳞片石墨/3Y-TZP复合陶瓷显微结构及其性能影响被引量:1
《陶瓷》2020年第9期33-39,共7页孙春阳 李小辉 曾立民 唐安山 顾华志 
笔者以羧甲基纤维素钠(CMC-Na)为分散剂,超声处理后经过机械球磨制备FG/3Y-TZP复合浆体,并且把干燥后复合粉体在乙醇溶液中进行二次搅拌分离,通过TEM显示大部分鳞片石墨包裹在氧化锆表面,而且包覆在氧化锆表面的鳞片石墨出现变薄变细现...
关键词:鳞片石墨 复合陶瓷 搅拌分离 显微结构 性能 
3Y-TZP陶瓷表面镧掺杂TiO_2薄膜的制备和抗菌性能研究被引量:1
《口腔疾病防治》2019年第3期153-158,共6页曾永发 付玉林 戴群 石连水 
江西省科技计划项目(20151BBG70238)
目的制备3Y-TZP陶瓷表面镧(La)掺杂TiO_2抗菌薄膜观察其抗菌性,为临床抗菌氧化锆陶瓷的应用提供实验基础。方法制备直径20 mm、高3 mm圆柱形3Y-TZP试件,采用溶胶凝胶法制备质量分数1.0%镧(La)掺杂的TiO_2溶胶,并通过浸渍提拉法涂覆于3Y-...
关键词:3Y-TZP陶瓷 氧化锆陶瓷 二氧化钛  光催化活性 抗菌性 细胞毒性 
多层陶瓷结构Al_2O_3-Fe_2O_3/3Y-TZP梯度复合陶瓷的制备及性能被引量:3
《复合材料学报》2019年第3期685-692,共8页李皓鹏 李宁 颜家振 周亚男 魏维 
科技型中小企业技术创新资金(15CXZJ0177)
为更好地实现口腔修复体的美学修复效果,采用掺杂不同含量Fe_2O_3(0.01wt%~0.09wt%)和Al_2O_3(0.1wt%)的3mol%Y2O3稳定的ZrO2(3Y-TZP)粉体为原料,经过铺粉、压制、烧结等工艺制得色度渐变的多层陶瓷结构Al_2O_3-Fe_2O_3/3Y-TZP梯度复...
关键词:梯度复合陶瓷 多层陶瓷结构 Y-TZP FE2O3 AL2O3 口腔修复材料 
鳞片石墨/3Y-TZP复合陶瓷烧结及其力学性能
《陶瓷》2018年第10期40-44,共5页孙春阳 罗志安 黄奥 张美杰 顾华志 
以十二烷基苯磺酸钠(SDBS)为分散剂制备FG/3Y-TZP复合粉体,并且把复合粉体进行二次工艺酒精浮选处理,采用氩气气氛常压高温烧结,制备系列FG/3Y-TZP复合陶瓷。研究鳞片石墨(FG)含量和浮选工艺对复合陶瓷材料的物相、显微结构的影响;建立...
关键词:鳞片石墨 复合陶瓷 浮选 强韧化 
检索报告 对象比较 聚类工具 使用帮助 返回顶部