supported by Ministry of Science and Higher Education Republic of Poland under contract No.11.11.110.299
The mechanical properties of the Zr52.5Cu17.9Ni14.6Al10Ti5 alloy were presented, with an emphasis on the strain rate effect and presence of crystalline inclusions on the deformation and fracture mechanisms. X-ray diff...
Iran University of Science and Technology for the financial support
The formation of bulk metallic glasses(BMGs) in the ternary Zr(56) Co(28-x)Al(16) and quaternary Zr(56) Co(28-x)CuxAl16(x=2, 4, 5, 6, 7, mole fraction, %) glassy alloys was investigated via the copper mo...
the financial support from UNAM-DGAPA-PAPIIT thorough the project 101016;CONACYT for the 232312 Ph D scholarship grant
The glass forming ability, thermal and mechanical properties of some Zr Cu Al Ni bulk metallic glasses were analyzed. The compositions of the alloys were theoretically determined with the dense packing and kinetic fra...
Project(51261021)supported by the National Natural Science Foundation of China;Project(KJLD13056)supported by the Science and Technology Landing Plan of Jiangxi Province,China
The corrosion behavior of bulk metallic glasses(BMGs)(Fe41Co7Cr15Mo14C15B6Y2)100-xCrx(x=0,4,8,12,molar fraction,%)was investigated in1mol/L HCl aqueous solution with electrochemical tests.The electrochemical measureme...
Projects(50874045,51301194)supported by the National Natural Science Foundation of China;Project(2144057)supported by the Beijing Natural Science Foundation,China
Room-temperature mechanical properties of Cu50Zr40Ti10-xNix(0≤x≤4,mole fraction,%) bulk metallic glasses (BMG) with aspect ratios in the range of 1:1-2.5:1 and loading rates in the range of1×10^-5-1×10^-2s^-...
Projects(51328101,51301142)supported by the National Natural Science Foundation of China;Project(2015JJ2206)supported by Hunan Provincial Natural Science Foundation of China
The combined effects of isothermal annealing and pre-compression on the mechanical properties of Cu36Zr48Al8Ag8 bulk metallic glass (BMG) were investigated. The as-cast specimens were first annealed at 743 K for 10 ...
Projects(51171041,51104047) supported by the National Natural Science Foundation of China;Project(N100409001) supported by the Fundamental Research Funds for the Central Universities,China
The(Zr_(0.55)Al_(0.1)Ni_(0.05)Cu_(0.3))_(100-x)Ti_x alloys were prepared using an in-situ suck-casting method in a copper mold. The effects of Ti addition on the microstructure, mechanical and corrosion pr...
Projects(50874045,51301194)supported by the National Natural Science Foundation of China;Project(2144057)supported by the Natural Science Foundation of Beijing Municipality,China
Effect of network structure on plasticity and fracture mode of Zr?Al?Ni?Cu bulk metallic glasses (BMGs) was investigated. The microstructures of transversal and longitudinal sections were exposed by chemical etch...
Project(2012M511401)supported by China Postdoctoral Science Foundation;Project(12JJ5018)supported by Hunan Provincial Natural Science Foundation of China;Project(2012RS4006)supported by Hunan Provincial Science and Technology Plan of China;Project(CSUZC2012028)supported by the Open-End Fund for the Valuable and Precision Instruments of Central South University,China
An interesting phenomenon of cooling-rate induced brittleness in Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass (BMG) was reported. It was found that the as-cast BMG specimens exhibited a brittle-ductile transition w...
Project(50971041)support by the National Natural Science Foundation of China
The glassy rods were successfully fabricated in the Cu-Zr-Ti-In alloy system by casting into a copper mold. The value of ATx reaches a maximum of 66 K for the BMG CusoZraTTi8In5 alloy. The reasons for enhancing glass ...