Funded by the Natural Science Foundation of Jiangsu Province(No.BK20241529);China Postdoctoral Science Foundation(No.2024M750736)。
This study aims to develop a chloride diffusion simulation method that considers the hydration microstructure and pore solution properties during the hydration of tricalcium silicate(C3S).The method combines the hydra...
Funded by the China Scholarship Council(No.201906710142)。
The non-isothermal crystallization dynamic behavior and mechanism of plasma sprayed Fe_(48)Cr_(15)Mo_(14)C_(15)B_(6)Y_(2)coating were thoroughly studied.The phase transition and crystallization kinetics of the coating...
Funded by the National Natural Science Foundation of China(U20A20272);the Special Projects for Military-Civilian Collaborative Innovation in Science and Technology of Hebei Province(202231401010003);the Open Topic of Key Laboratory of Material Forming and Structure Property Control from University of Science and Technology Liaoning(USTLKFSY201708)。
To elucidate the diffusion behavior of carbon atoms within the austenite region,the decarbonization of 72LX steel bloom was investigated.Experimental studies were performed to obtain the depth profiles of the decarbur...
Funded by the Science and Technology Project of Henan Department of Transportation(No.2020J-2-3);Shaanxi Transportation Science and Technology Project(Nos.17-05K,19-10K,19-28K)。
The physical performance of recycled asphalt was used as the main evaluation index to study the optimal range of a self-made rejuvenator.Through the penetration,viscosity and gel permeation chromatography(GPC)tests,th...
Funded by Key Projects of Shaanxi Natural Science Foundation(No.2019JZ-27);Shaanxi Natural Science Basic Research Program-Shaanxi Coal(No.2019JLM-47);Fundamental Research Funds for the Central Universities CHD(No.300102319304).
To improve the low thermal conductivities and poor wear resistances of TC4(Ti-6Al-4V)alloy,the most widely used titanium alloy,the surface of TC4 alloys is modified by electroplating deposition of Ni and Cu layers,and...
Funded by National Science and Technology Major Project(No.2017-Ⅵ-0009-0080);Science and Technology Planning Project of Wuhan(No.2018010401011281).
Diffusion bonding between Al and Cu was successfully performed by hot isostatic pressing(HIP). To improve the strength of diffusion bonding joint, pure nickel foils with different thickness were used as intermediate l...
Funded by the National Natural Science Foundation of China(Nos.51271040 and 51271041);the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
The effects of Mg on the microstructure and growth kinetics of the hot-dip Zn-22.3 Al-1.1 Si-x Mg(x = 0, 0.2, 0.4, and 0.6) coatings were investigated in detail. Scanning electron microscopy with energy dispersive spe...
Funded in Part by National Natural Science Foundation of China(Nos.11575129 and 11275142)
We derived revised effective diffusion energy barriers following the Boltzmann distribution assumption for impurity atoms in a bulk material under the impact of various kinds of point defects to reveal the insights of...
Supported by National Natural Science Foundation of China(Nos.91226202,91426304);CAS Interdisciplinary Innovation Team Project
The spark plasma sintering(SPS) method was used to study the mechanism of reaction interface between Zr and Ti3AlC2 with electric current going through it. It was found that electric current greatly reduced the bond...
Funded by the Shanghai Science and Technology Committee(12nm0504700)
Silver nanoclusters(NCs) embedded in soda-lime glass was synthesized by the electric fieldassisted diffusion(EFAD) and successive annealing. The samples were characterized by UV-Vis absorption spectroscopy, photol...