嗜酸乳杆菌喷雾干燥技术的研究  

Study of the Microencapsulation Technology of Lactobacillus Acidophilus

作　　者：罗佳琦[1] 于晓晨[1] 于才渊[1] 

机构地区：[1]大连理工大学化工学院,辽宁大连116012

出　　处：《干燥技术与设备》2008年第6期273-278,共6页

摘　　要：研究利用喷雾干燥法对嗜酸乳杆菌进行微胶囊化处理,以微胶囊产品细菌存活率作为主要考察目标,设计了四因素三水平的正交试验。通过正交试验分析,得出微胶囊细菌存活率优化工艺条件为:进风温度140℃;进料速度14.58ml/min;主要壁材阿拉伯胶与麦芽糊精的配比为1:10;壁材浓度为20%。微胶囊内细菌的存活率可达63%,活菌数达到108cfu/ml数量级。并对微胶囊进行了表征。This research is to prepare Lactobacillus acidophilus microcapsules by spray drying technology. Aimed at the survival rate of the Lactobacillus acidophilus in microcapsules products, a four-factor, three-level orthogonal experiment was designed. According to the orthogonal experiment, the optimum operating conditions of spray drying were achieved as follows： the inlet air temperature of 140℃, the feed flow rate of 12.5 ml/min, the ratio of gum arabic to maltodextrin of 1：10, wall material concentration of 20%. Under these conditions, the bacteria survival rate reached 63%, with the survival Lactobacillus acidophilus of 108cfu/ml. Furthermore the microcapsules are characterized.

关 键 词：微胶囊化 喷雾干燥 嗜酸乳杆菌 细菌存活率 

分 类 号：TQ028.672[化学工程]