检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中南大学土木工程学院,湖南长沙410075 [2]中南大学信息科学与工程学院,湖南长沙410075
出 处:《铁道科学与工程学报》2011年第4期19-23,共5页Journal of Railway Science and Engineering
基 金:国家自然科学基金资助项目(50908233)
摘 要:针对京沪高速铁路采用的CRTSⅠ型板式、CRTSⅡ型板式、双块式3种无砟轨道,采用有限单元法软件ANSYS建立有限元模型,计算3种无砟轨道路基的动力响应,并进行对比分析。结果表明:在0~1 m深度范围内,双块式无砟轨道路基竖向动应力幅值明显小于板式无砟轨道;3种无砟轨道路基竖向动位移幅值仅在0~1 m深度范围内有较大差别,且双块式无砟轨道小于板式无砟轨道;双块式无砟轨道基床表层表面与基床底层表面的动应力、动位移在距路基中线约1 m范围内明显小于板式无砟轨道;板式无砟轨道结构垂直于线路方向的刚度小于双块式无砟轨道,CA砂浆层可能是引起这种差异的主要原因。该结果对同类研究具有一定参考价值。For three kinds of ballastless tracks used in Beijing-Shanghai high-speed railway,including CRTSⅠ slab ballastless track,CRTSⅡ slab ballastless track and twin-block ballastless track,the dynamic response of their subgrade was calculated and compared through finite element models established by ANSYS.The result shows that,in depth ranging from 0 to 1 m,dynamic stress amplitude in twin-block ballastless track subgrade is obviously less than that in slab ballastless track subgrade.The dynamic displacement in three kinds of ballastless tracks subgrade is different only in depth from 0 to 1m,and dynamic displacement in twin-block ballastless track subgrade is less than that in slab ballastless track subgrade.Compared with slab ballastless track,when distance from the subgrade centerline is less than 1m,the dynamic stresses and displacements in surface of upper roadbed and lower roadbed of twin-block ballastless track subgrade are obviously smaller.In the direction perpendicular to the alignment of railway,the slab ballastless track shows a less stiffness than twin-block ballastless track,for which the buffer effect of CA mortar may be responsible.The results have certain reference value for similar researches.
分 类 号:U213.244[交通运输工程—道路与铁道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3