检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:贠建民[1] 连文绮[1] 蒲陆梅[2] 薛华丽[2] 艾对元[1] 张紊玮[1]
机构地区:[1]甘肃农业大学食品科学与工程学院,甘肃兰州730070 [2]甘肃农业大学理学院,甘肃兰州730070
出 处:《食品科学》2012年第24期6-10,共5页Food Science
基 金:"十一五"国家科技支撑计划项目(2007BAD52B07)
摘 要:从料液比、碱用量和无水乙醇用量方面进行单因素试验,并选用一次回归正交设计法对酸碱沉淀法分离啤酒花浸膏中α-酸和β-酸的工艺参数进行优化筛选。结果表明:分离β-酸的最优参数为KOH质量分数6.5%,无水乙醇用量1mL/g,料液比1:60(g/mL),主次因素顺序为碱用量>料液比>无水乙醇用量;用全回归法求得的多元回归方程式为=84.375-2.843X1-1.995X2+2.360X3。分离α-酸的最优参数组合为KOH质量分数8.5%,无水乙醇用量1mL/g,料液比1:60(g/mL),主次因素顺序为无水乙醇用量>料液比>碱用量;用全回归法求得的多元回归方程式为:=82.667+1.515X1-2.950X2+2.037X3。经高效液相色谱法检测,分离产品α-酸纯度达到86.43%,β-酸纯度达到87.12%,证明该分离工艺纯化效果良好。This work reports the use of one-factor-at-a-time combined with linear orthogonal regression design to optimize process parameters including alkali (KOH) dosage (X1), anhydrous alcohol dosage (X2) and solid-to-solvent ratio (X3) for the extraction of humulone and lupulone from hop extract by acid-alkali precipitation. The optimal conditions for separating lupulone from hop extract were determined as 6.5% (m/m) of KOH dosage, 1 mL/g of anhydrous alcohol dosage and 1:60 g/mL of solid-to-solvent ratio. KOH dosage was the most important process condition followed by solid-to-solvent ratio and anhydrous alcohol dosage. The following multiple regression model that describes final lupulone content (Y) of the lupulone extract (i.e., purity) as a function of the process conditions was established by complete regression analysis: Y= 84.375- 2.843X1-1.995X2 + 2.360X3. The optimal conditions for separating humulone from hop extract were determined as 8.5% (m/m) of KOH dosage, 1 mL/g of anhydrous alcohol dosage and 1:60 (g/mL) of solid-to-solvent ratio. Anhydrous alcohol dosage was the most important process condition, solid-to-solvent ratio was in the middle and KOH dosage was the least important one. The following multiple regression model that describes final lupulone content (Y) of final humulone content (Y) of the humulone extract (i.e., purity) as a function of the process conditions was established by complete regression analysis: Y= 82.667 + 1.515X1-2.950X2 + 2.037X3. The purities of humulone and lupulone in both extracts were as high as 86.43% and 87.12%, respectively as shown by HPLC analysis.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28