基于ADAMS的移动机器人避障仿真研究  

Simulation of Obstacle Avoidance about Mobile Robot Based on ADAMS

作　　者：郑海华[1] 贺继林[1,2] 赵喻明[1,2] 唐学佳 

机构地区：[1]中南大学高性能复杂制造国家重点实验室,湖南长沙410083 [2]山河智能装备股份有限公司,湖南长沙410100

出　　处：《计算机仿真》2014年第5期336-341,共6页Computer Simulation

基　　金：国家科技支撑计划项目(2013BAF07B02)

摘　　要：针对人工势场法中势场增益系数的匹配不当影响避障轨迹平稳性的问题,在ADAMS环境中建立移动机器人的三维避障模型,从机器人受力平衡角度深入分析轨迹产生振荡的原因,经过适当缩小两个增益系数的数量级差获得了较平稳的避障轨迹,机器人质心速度最高增幅控制在合理的范围内。同时以速度矢量导向法则来指引机器人的转向动作,实现了行驶过程中车体姿态的实时调整,有助于避障轨迹的进一步优选。另外车体实时转向的添加引起车体两侧车轮运动参数不一致,与单纯的平行运动相比,改进方法对差速转向的机器人的实际控制更具有参考价值。To solve the problem that the mismatch of gain factors will impact the avoidance trajectory stability about artificial potential field method, a three-dimensional mobile robot obstacle avoidance model was created in the ADAMS environment. The cause of oscillation trajectory was analyzed from the perspective of force balance in the ro- bot. After narrowing the differential between two gain factors, the avoidance trajectory was more stable and robot cen- troid highest growth rate was controlled at a reasonable range. The body posture achieved real-time adjustment during moving by using the velocity vector-oriented rules to guide the robot＇s steering movement. It conduces to further preferred avoidance trajectory. The addition of real-time steering is more valuable for the differential steering robot control against the parallel movement due to the differential motion parameters of two side wheels.

关 键 词：移动机器人 避障 人工势场法 

分 类 号：TP242[自动化与计算机技术—检测技术与自动化装置] TP391.4[自动化与计算机技术—控制科学与工程]