悬臂式掘进机工作机构的动力学仿真  

Dynamic Simulation of Operating Mechanism for Boom-type Roadheader

作　　者：李旭[1] 瞿圆媛[1] 吉晓冬[1,2] 杨阳[1,2] 吴淼[1] 

机构地区：[1]中国矿业大学(北京)机电与信息工程学院,北京100083 [2]石家庄煤矿机械有限责任公司,石家庄050031

出　　处：《煤炭技术》2016年第11期234-236,共3页Coal Technology

基　　金：国家重点基础研究发展计划(973计划)(2014CB046300)

摘　　要：为得到悬臂式掘进机工作机构关键铰点处受力,基于EBZ160型掘进机,建立其工作机构的三维模型,利用实测掘进机工作油压数据推算出的截割头载荷进行加载,结合虚拟样机技术完成动力学仿真。In order to obtain the hinge joint force of operating mechanism for boom-type roadheader, this manuscript focus on the three-dimensional model of operating mechanism of EBZ160 roadheader. Cutting head load which were calculated by measured working pressure data were used to load. Dynamic simulation accomplished, combined with virtual prototype technology.

关 键 词：掘进机 工作机构 虚拟样机 

分 类 号：TD421.5[矿业工程—矿山机电]