混料设计优化酶法制备中长链甘三酯复合酶配比  

The mixture design optimized the ratio of compound lipases for preparing medium and long chain triglycerides by enzymatic method

作　　者：金璐 张丽霞[1] 孙强[1] 孙晓静 魏松丽 黄纪念[1] JIN Lu;ZHANG Li-xia;SUN Qiang;SUN Xiao-jing;WEI Song-li;HUANG Ji-nian(Research Center of Agricultural Products Processing,Henan Academy of Agriculture Sciences,Zhengzhou 450002,Henan,China)

机构地区：[1]河南省农业科学院农产品加工研究中心,河南郑州450002

出　　处：《粮食与油脂》2024年第6期123-127,共5页Cereals & Oils

基　　金：河南省农业科学院自主创新项目(2023ZC076);河南省农业科学院青年国际科技交流基金;河南省农业科学院科技创新团队项目(2023TD23)。

摘　　要：以癸酸插入率为指标,采用混料设计对酶法合成中长链甘三酯(MLCT)的3种Sn-1,3位特异性脂肪酶(Lipozyme RM IM、Lipozyme TL IM和NS40086)配比进行优化,并对MLCT产物的脂肪酸组成及复合酶的稳定性进行分析。结果表明:3种酶对MLCT产物癸酸插入率的影响依次为NS40086>Lipozyme RM IM>Lipozyme TL IM,Lipozyme RM IM、Lipozyme TL IM和NS40086的最佳质量比为0.323∶0.122∶0.555,在此条件下MLCT产物的癸酸插入率为46.87%±0.24%,Sn-2位油酸含量为73.13%,Sn-1,3位癸酸含量为62.60%,制得的复合酶具有良好的稳定性。Using decylic acid insertion rate as index,the ratio of three Sn-1,3 specific lipase(Lipozyme RM IM,Lipozyme TL IM and NS40086)was optimized by mixture design for enzymatic synthesis of medium and long chain triglycerides(MLCT),and the fatty acid composition of MLCT products and stability of compound lipase were analyzed.The results showed that the effects of three lipase on decylic acid insertion rate of MLCT products were NS40086>Lipozyme RM IM>Lipozyme TL IM.The optimal mass ratio of Lipozyme RM IM,Lipozyme TL IM and NS40086 was 0.323:0.122:0.555.Under the conditions,the decylic acid insertion rate was 46.87%±0.24%,the Sn-2 oleic acid content was 73.13%,and the Sn-1,3 decylic acid content of MLCT products was 62.60%.The obtained compound lipase had good stability.

关 键 词：混料设计 中长链甘三酯(MLCT) 复合酶 插入率 

分 类 号：TS201.25[轻工技术与工程—食品科学]