AL-CU

作品数:281被引量:771H指数:10
导出分析报告
相关领域:金属学及工艺一般工业技术更多>>
相关作者:郑子樵陈康华张卫文郝启堂李世晨更多>>
相关机构:中南大学西北工业大学哈尔滨工业大学沈阳工业大学更多>>
相关期刊:更多>>
相关基金:国家自然科学基金国家重点基础研究发展计划广西壮族自治区自然科学基金中国博士后科学基金更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
仿贝壳ZrB_(2)/Al-Cu层状复合材料的组织与力学性能
《中国有色金属学报》2025年第3期852-865,共14页班生涛 成桃 李杰宇 朱劲松 肖华强 林波 
国家自然科学基金资助项目(52265043);贵州省科技计划项目[ZK2023(014)];贵州省优秀青年科技人才项目(YQK[2023]011);贵州大学基金资助项目([2024]03);贵州省科学技术基金资助项目(BQW[2024]011)。
采用冷冻铸造和压力浸渗工艺制备了仿贝壳ZrB_(2)/Al-Cu层状复合材料,研究了复合材料的微观组织、力学性能和断裂机理。结果表明:随着ZrB_(2)体积分数的增加,ZrB_(2)/Al-Cu层状复合材料的准静态抗压强度与抗弯强度增大,但裂纹萌生韧性(K...
关键词:冷冻铸造 压力浸渗 仿贝壳ZrB_(2)/Al-Cu层状复合材料 断裂行为 动态加载 
Influence of minor cerium addition on microstructure and fluidity of as-cast Al-Cu-Mn-Mg alloy
《Journal of Rare Earths》2025年第2期377-383,I0006,共8页Yishan Wang Yu Bai Kaixi Jiang Wenxue Fan Puxuan Wang Hai Hao 
Project supported by the National Natural Science Foundation of China (52171030);the Key Basic Research Project of the Basic Strengthen Program (2021-JCJQ-ZD-043-00);the National Key Research and Development Program of China (2018YFA0702903)。
Al-Cu-Mn alloys are widely used to produce automobile components like cylinder heads and engine blocks because of their capability to retain excellent thermal and mechanical characteristics at high temperatures.Howeve...
关键词:Al-Cu-Mn-Mg alloy Rare earths Ce addition MICROSTRUCTURE FLUIDITY 
Ultralow-Vertical-Current Magnetization Switching Effect in an All Van Der Waals 2D Heterostructure
《Chinese Physics Letters》2025年第2期239-248,共10页Hao Wu Li Yang Gaojie Zhang Wen Jin Jie Yu Bichen Xiao Ahmed Annas Wenfeng Zhang Haixin Chang 
supported by the National Key Research and Development Program of China(Grant No.2022YFE0134600);the Interdisciplinary Research Program of Huazhong University of Science and Technology(Grant No.2023JCYJ007);the China Postdoctoral Science Foundation(Grant No.2022M711234);the National Natural Science Foundation of China(Grant Nos.52272152,61674063,and 62074061);the Natural Science Foundation of Hubei Province,China(Grant No.2022CFA031);the Foundation of Shenzhen Science and Technology Innovation Committee(Grant Nos.JCYJ20180504170444967,JCYJ20210324142010030,and JCYJ20230807143614031)。
The manipulation of magnetization and spin polarization using electrical currents represents a fundamental breakthrough in spintronics.It has formed the foundation for data storage and next-generation computing system...
关键词:MAGNETIZATION critical typically 
Al-Cu-Mn-RE合金组织及耐热性能研究
《铝加工》2025年第1期12-16,共5页赵斌斌 汤宏群 赵茂密 陈宇 
中央引导地方科技发展资金项目(桂科ZY22096001);广西南宁揭榜制科技项目(20231082)。
通过拉伸试验机、SEM、TEM等试验设备对Al-Cu-Mn-RE(La/Ce)合金的组织及耐热性能进行研究,结果显示:通过热力学软件Thermo-Calc计算的固相线温度值可为合金固溶处理温度选取提供参考;200℃热暴露100 h后室温强度为224.2 MPa,350℃热暴露...
关键词:AL-CU-MN合金 稀土La/Ce 热暴露 耐热相 TEM 
CH-Al-Cu整体式催化剂催化臭氧氧化环己酮肟废水
《中国给水排水》2025年第1期25-31,共7页盛丹娜 孙景彤 邹金儒 耿男男 刘永泽 
国家自然科学基金资助项目(52070014)。
整体式催化剂的制备及其持续运行性能是催化臭氧氧化应用的关键问题。采用蜂窝陶瓷(CH)作为载体、以γ-Al_(2)O_(3)为涂层材料、以铜(Cu)为活性组分制备了CH-Al-Cu整体式催化剂,并调控工艺运行参数对其在连续流催化臭氧氧化过程中的性...
关键词:催化臭氧氧化 整体式催化剂 连续流 环己酮肟 催化剂填充位置 ·OH 
直接时效对激光增材制造Al-Cu-Mg-Li-Sc-Zr合金组织与性能的影响
《材料热处理学报》2024年第12期48-57,共10页吴祖胜 刘燕 高建宝 章媛洁 张金良 宋波 史玉升 
国家重点研发计划(2023YFB4604800);国家自然科学基金(52275331,52201041,52401047);湖北省重点研发计划(2022BAA011);中国博士后科学基金(2021M690061,2023M741244)。
采用光学显微镜、扫描电镜、透射电镜、显微硬度计和和万能材料试验机等研究了直接时效对激光选区熔化制备的Al-Cu-Mg-Li-Sc-Zr合金显微组织和力学性能的影响。结果表明:经直接时效热处理后,Al-Cu-Mg-Li-Sc-Zr合金中析出了大量针状和球...
关键词:激光选区熔化 Al-Cu-Mg-Li-Sc-Zr合金 直接时效 显微组织 力学性能 
Microstructure and Wear Resistance Properties of FeCrAl-Cu(Ni,Co)HEA Coatings Synthesized by Laser Remelting
《稀有金属材料与工程》2024年第10期2747-2754,共8页Ma Kai Feng Li Zhao Yanchun Liu Jianjun 
Supported by China National Nuclear Power Plant Operation(QS4FY-22003224)。
FeCrAlCu,FeCrAlCuNi,FeCrAlCuCo,and FeCrAlCuNiCo high-entropy alloy(HEA)coatings were synthesized on the surface of 45#steel through cold spraying-assisted laser remelting.Results reveal that all four HEA coatings are ...
关键词:laser remelting high-entropy alloy coating wear mechanism abrasion resistance 
Al-Cu-Sc铝合金板材不同热处理状态下的组织和力学性能研究
《塑性工程学报》2024年第9期135-143,共9页崔晓磊 刘章光 赵远杨 马向宇 华坤 
中国博士后科学基金资助项目(2023T160158,2020M670907)。
以厚度为3 mm的Al-Cu-Sc铝合金板材为研究对象,利用EBSD技术对人工时效态(T6态)和退火态(O态)板材的微观组织进行分析;对T6态、O态、W态以及经过预拉伸变形和人工时效处理得到的T8态板材在室温下进行单向拉伸测试,研究不同热处理状态下...
关键词:Al-Cu-Sc合金板材 热处理 微观组织 轧制方向 力学性能 
Dual-curvilinear beam enabled tunable manipulation of high-and low-refractive-index particles被引量:1
《Photonics Research》2024年第7期1427-1436,共10页ZHENG YUAN CHENCHEN ZHANG YUAN GAO WENXIANG YAN XIAN LONG ZHI-CHENG REN XI-LIN WANG JIANPING DING HUI-TIAN WANG 
National Key Research and Development Program of China (2023YFA1406903, 2022YFA1404800);National Natural Science Foundation of China (12374307,12234009, 12274215);Postgraduate Research&Practice Innovation Program of Jiangsu Province (KYCX23_0103)。
We present an innovative approach for the simultaneous agile manipulation of high-refractive-index(HRI) and low-refractive-index(LRI) particles. Our method involves introducing a dual-curvilinear optical vortex beam(D...
关键词:TUNABLE refractive BEAM 
Effect of V on high-temperature mechanical properties of Al-5Cu-1.5Ni alloy
《Journal of Iron and Steel Research International》2024年第7期1792-1810,共19页Jun-ge Cui Yong-bin Chen Xiang-zhou Fu Hai-long Yang Han-zhang Wang An-min Li Li-wen Pan 
The authors acknowledge the Special Project of Material Processing of Guangxi Key Laboratory of Processing for Non-ferrous Metal and Featured Materials (2021GXMPSF04);Youth Fund of Guangxi Key Laboratory of Processing for Non-ferrous Metal and Featured Materials (GXYSYF1806);Special Funds for Local Scientific and Technological Development under the Guidance of the Central Government in 2021 (GuiKeZY21195030);Guangxi Science and Technology Base and Talent Project in 2022 (GuiKeAD21238010);Guangxi University Students Innovation and Entrepreneurship Training Program (202210593118).
The effects of V on microstructure,room temperature,and high-temperature(350℃)mechanical properties of Al-5Cu-1.5Ni alloy were investigated.The results show that Al-5Cu-1.5Ni-xV alloys mainly compriseα-Al,Al_(2)Cu,A...
关键词:Al-Cu-Ni-V alloy θ'-Al_(2)Cu phase Heat treatment Microstructure Mechanical property 
检索报告 对象比较 聚类工具 使用帮助 返回顶部