检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王淑娟[1] 李明智 宁井铭[1] 童城 王璟[1] 杨悦[1] 方世辉[1] 戴前颖[1]
机构地区:[1]安徽农业大学茶树生物学与资源利用国家重点实验室,安徽合肥230036 [2]安徽弋江源茶业有限公司,安徽黟县245500
出 处:《福建农林大学学报(自然科学版)》2015年第4期367-372,共6页Journal of Fujian Agriculture and Forestry University:Natural Science Edition
基 金:黄山市科技项目(2013KN-07)
摘 要:就加工工艺参数对石墨茶品质的影响进行初步探索,通过对不同加工工艺参数石墨茶的感官审评和内含物质测定,筛选最优的加工工艺参数.结果表明,揉捻的最优工艺参数为:投叶量10 kg、揉捻时间15-20 min;二青程度应控制茶叶的减重率在30%左右;炒小锅的最优工艺参数为:投叶量5 kg、炒制时间60 min、叶温控制在(50±5)℃;炒大锅的最优工艺参数为:投叶量13 kg、叶温控制在(45±5)℃.该工艺参数下制得的成品茶,其有效化学成分含量较高,且外形、香气和滋味较佳.To explore the relationship between quality of Shimo tea and the processing technique, the sensory evaluation and content test of embedded substance of Shimo tea under different processing parameters were conducted. The results showed that: The best rolling parameter was 10 kg of leaf weight, 15-20 min of time control. The degree of first-step roasting should be controlled around 30% weight-loss ratio. The best shaping parameter of first-step was 5 kg of leaf weight, 60 rain of time control, (50±5)℃ of tem- perature control. The second-step shaping parameter should be 13 kg of leaf weight, (45±5)℃ of temperature control. The chemi- cal components of the finished tea which was made in the optimum technological parameters could be dissolved well, and the shape, the aroma and the taste were comparatively good.
关 键 词:石墨茶 揉捻 二青 炒小锅 炒大锅 感官品质 内含成分
分 类 号:S571.1[农业科学—茶叶生产加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.62