酶法制备甘油二酯与甘油三酯的结晶特性研究  被引量:19

Crystallization behaviors of diacylglycerol and triacylglycerol prepared by enzymatic catalysis

在线阅读下载全文

作  者:陈琼[1,2] 杨雪[1,2] 赵金利[1,2] 滕英来 汪勇[1,2] 

机构地区:[1]暨南大学食品科学与工程系,广州510632 [2]暨南大学-萨斯喀切温大学油料生物炼制与营养联合实验室,广州510632

出  处:《中国油脂》2015年第11期48-53,共6页China Oils and Fats

基  金:国家自然科学基金项目(31371785);广东省战略新兴产业核心技术攻关项目(2012A080800013);教育部"新世纪优秀人才"支持计划(NCET-12-0675)

摘  要:采用Lipozyme RM IM催化大豆油和棕榈油硬脂(熔点45℃)混合油与单甘酯(由大豆油、棕榈油硬脂和甘油合成)酯交换合成甘油二酯,并以此酶催化大豆油和棕榈油硬脂(熔点45℃)酯交换合成甘油三酯。采用差示扫描量热仪、脉冲核磁共振仪和偏光显微镜测定甘油二酯、甘油三酯以及甘油三酯中添加不同比例甘油二酯(10%、30%、50%和70%)的混合物的结晶和熔化性质。结果表明:脂肪酸组成接近的甘油二酯,初始结晶温度(28.14℃)和熔点(48.26℃)比甘油三酯初始结晶温度(8.51℃)和熔点(30.58℃)高。添加50%和70%的甘油二酯能够提高甘油三酯的熔点和初始结晶温度,而添加10%和30%的甘油二酯对其结晶影响较小。随着甘油二酯添加比例的增大,混合物的固体脂肪含量逐渐增加。添加50%和70%甘油二酯的混合物,在熔点温度附近时晶体为针状。Lipozyme RM IM was used as catalyst in the synthesis of diacylglycerol (DAG) by the transes- terification of soybean oil mixed with palm stearin ( melting point 45 ℃ ) and monoacylglycerol ( MAG, prepared by soybean oil, palm stearin and glycerol), and in the synthesis of triacylglycerol (TAG) by the transesterification of soybean oil and palm stearin. Crystallization and melting behaviors of the DAG, TAG and TAG added with different proportions ( 10% ,30% ,50% and 70% ) of DAG were determined by differential scanning calorimetry (DSC), pulsed -nuclear magnetic resonance (pNMR) and polarized microscopy. The results showed that with similar fatty acid compositions, the initial crystallization temper- ature ( 28.14 ℃ ) and melting point (48.26 ℃ ) of DAG was higher than the initial crystallization tempera- ture (8.51 ℃ ) and melting point ( 30.58 ℃ ) of TAG. By adding 50% and 70% of DAG, the melting point and initial crystallization temperature of TAG increased. In comparison, adding 10% and 30% of DAG had less impact on the crystallization of TAG. The solid fat content of the mixture gradually improved with the increase DAG. Acicular crystals with 50% and 70% of melting points. of addition proportion of in the mixtures added DAG were found near

关 键 词:甘油二酯 甘油三酯 酯交换 差示扫描量热法 结晶特性 

分 类 号:TQ641[化学工程—精细化工]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象