SN-CU

作品数:64被引量:246H指数:8
导出分析报告
相关领域:金属学及工艺天文地球更多>>
相关作者:杜长华周敬恩席生岐冉广李广东更多>>
相关机构:中国地质大学(北京)大连理工大学合肥工业大学北京工业大学更多>>
相关期刊:《Science Bulletin》《电镀与环保》《大连理工大学学报》《印制电路信息》更多>>
相关基金:国家自然科学基金中国地质调查局地质调查项目中国博士后科学基金“十一五”国家科技支撑计划更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Sn-Cu-Co-Ni-Bi高温软钎料组织及性能研究
《特种铸造及有色合金》2023年第12期1591-1597,共7页樊江磊 王娇娇 王宁格 吴深 周向葵 李莹 王艳 
河南省自然科学基金资助项目(222300420584)。
根据高熵合金设计原理设计了多组元Sn基高温无铅软钎料,研究了Sn-Cu-Co-Ni-Bi系钎料合金的微观组织、力学性能和钎焊性能随合金混合熵改变的变化规律。结果表明,钎料合金的微观组织由固溶体和析出相Sn、Bi、CoSn_(2)、Cu_(6)Sn_(5)和Ni3...
关键词:无铅钎料 高熵合金 微观组织 力学性能 钎焊性能 
Effects of macrosegregation on mechanical and tribological properties of squeeze casting immiscible bearing alloys
《China Foundry》2023年第5期443-451,共9页Ming Xu Yan-guo Yin Cong-min Li Guo-tao Zhang Cong-chong Duan 
This research was financially supported by the National Natural Science Foundation of China(No.51575151 and No.52005005);the Science and Technology Project of Anhui Province,China(No.1501021006).
The macrosegregation behaviors of Al-Sn-Cu ternary immiscible alloy castings and their effects on mechanical and tribological properties were investigated.The results demonstrate that Sn and Cu segregate in the castin...
关键词:squeeze casting Al-Sn-Cu MACROSEGREGATION mechanical properties tribological property 
云南个旧Sn-Cu多金属矿田中酸性岩黑云母特征及其成矿意义被引量:2
《地球化学》2023年第2期212-221,共10页解世雄 陈喜连 黄文婷 张健 廖娟 欧阳柳芸 梁华英 
科技部国家重点研究计划(2016YFC0600407)资助。
Cu和Sn在中酸性岩浆作用过程中地球化学行为明显不同,少见2种类型矿床与同一岩浆作用共生。滇东南个旧Sn-Cu多金属矿田矿床和燕山期岩浆岩联系紧密, Sn-Cu共生,都达超大规模,国内外罕见。目前对个旧矿田Sn-Cu共生控制因素探讨不多。本...
关键词:Sn-Cu多金属矿床 黑云母 岩浆氧化还原状态 岩浆挥发分 
Morphologies of intermetallic compound phases in Sn-Cu and Sn-Co peritectic alloys during directional solidification被引量:1
《China Foundry》2022年第5期411-418,共8页Peng Peng Jin-mian Yue An-qiao Zhang Jia-tai Wang Jiang-lei Fan 
the support of the National Natural Science Foundation of China (Grant No. 51871118);the Fast Support Project (Grant No. JZX7Y20210162400301);the fund of State Key Laboratory of Special Rare Metal Materials (Grant No. SKL2020K003)
The morphologies of intermetallic phases(IMCs)during directional solidification of the Sn-Cu(L+Cu_(3)Sn→Cu_(6)Sn_(5))and Sn-Co(L+CoSn→CoSn_(2))peritectic systems were analyzed.The primary Cu_(3)Sn and peritectic Cu_...
关键词:intermetallic compound phase peritectic alloy directional solidification solubility range sub-structure 
Influence of Cu content on microstructure,grain orientation and mechanical properties of Sn-xCu lead-free solders被引量:3
《Transactions of Nonferrous Metals Society of China》2022年第4期1226-1241,共16页Kannachai KANLAYASIRI Niwat MOOKAM 
Rajamangala University of Technology Rattanakosin and School of Engineering,King Mongkut’s Institute of Technology Ladkrabang for the laboratory support of this research。
The effect of Cu content on the microstructure,grain orientation and mechanical properties of Sn-xCu(x=0-4.0 wt.%)lead-free solder was studied.Results showed that added Cu induced the formation of intermetallic phases...
关键词:lead-free solder Sn-Cu alloys crystallographic orientation MICROSTRUCTURE INTERMETALLICS mechanical properties 
云南个旧Sn-Cu多金属矿田风流山矿段原生晕分带与深部成矿预测被引量:4
《地质与勘探》2022年第1期49-60,共12页杨融 陈永清 
国家自然科学基金(编号:41672329、41972312);国家重点研发计划课题(编号:2016YFC0600509)联合资助。
云南个旧风流山矿段位于老卡岩体西侧,老厂矿田的南部,风流山Sn-Cu多金属矿段属于蚀变花岗岩型矿化,矿化发生于花岗岩内蚀变带,矿体受断裂和裂隙控制。运用格里戈良分带指数法对风流山34矿段第5勘探线剖面样品进行蚀变矿化分析和原生晕...
关键词:原生晕分带 内蚀变带 深部成矿预测 矿体模型 个旧 云南 
基于不同键合参数的Cu-Sn-Cu微凸点失效模式分析被引量:1
《电子与封装》2022年第1期1-6,共6页张潇睿 
电迁移已经成为影响微电子产品可靠性最严重的问题之一,长时间电流负载下,互连金属凸点内部由于空洞、裂纹等缺陷导致产品失效风险提高。为了研究不同键合参数下互连金属微凸点的失效模式,基于CB-600倒装键合机,得到了不同键合质量的芯...
关键词:键合参数 失效模式 微凸点 可靠性 
大兴安岭南段毛登Sn-Cu矿床岩浆作用对成矿制约:年代学、地球化学及Sr-Nd-Pb同位素证据被引量:7
《大地构造与成矿学》2021年第4期681-704,共24页季根源 江思宏 李高峰 易锦俊 张莉莉 刘翼飞 
科技部深地项目(2017YFC0601303);国家自然科学基金项目(41873051);地科院基本业务费项目(YYWF201715);地质调查项目(DD20190437、DD20190411)联合资助。
毛登Sn-Cu矿床位于大兴安岭南段内蒙古锡林浩特境内,其Sn、Cu储量均达到中型。本文利用LA-ICP-MS锆石U-Pb法测得与成矿关系密切的花岗斑岩成岩年龄为138±0.6 Ma;利用LA-ICP-MS锡石U-Pb法测得锡石‒硫化物‒石英脉型矿石中锡石的Tera-Wass...
关键词:大兴安岭南段 毛登锡铜矿床 锡石U-Pb年龄 锆石U-Pb年龄 SR-ND-PB同位素 
个旧老厂Sn-Cu矿床内外接触带矿体原生晕分带与深部矿体预测模型被引量:5
《地学前缘》2021年第3期112-127,共16页朱旭 杨融 陈永清 王连月 李刚 
国家重点研发计划项目(2016YFC0600509);国家自然科学基金项目(41972312,41672329)。
矿床的原生晕通常形成在矿体周围,与蚀变矿物和矿石矿物同时形成。矿床原生晕的分带规律能够提供较为准确的找矿目标。一些金属矿床的原生晕具有示踪隐伏矿体的作用,从而为探测深埋矿体提供了重要的线索。老厂大型锡多金属矿床是个旧巨...
关键词:探途元素 原生晕分带 深部矿体预测模型 个旧矿田 中国西南 
Identification of the Ore-Forming Anomaly Component by MSVD Combined with PCA from Element Concentrations in Fracture Zones of the Laochang Ore Field,Gejiu,SW China被引量:2
《Journal of Earth Science》2021年第2期427-438,共12页Jiangnan Zhao Shouyu Chen 
jointly supported by the National Key R&D Program of China(Nos.2016YFC0600509,2017YFC0601504)。
Fault and fractures are well-developed in the Gejiu tin-polymetallic district,and they are closely related to the formation and distribution of ores.In this paper,the principal component analysis(PCA)and multifractal ...
关键词:singular value decomposition(SVD) principal component analysis(PCA) ore-forming element anomaly components Sn-Cu polymetallic ore-finding targets Gejiu Sn-Cu ore field SW China 
检索报告 对象比较 聚类工具 使用帮助 返回顶部