The research work was supported by grants received from CAAST-ACLH(No.NAHEP/CAAST/2018-19)of ICAR-World Bank-funded National Agricultural Higher Education Project(NAHEP).
With the emergence and spread of antimicrobial resistance(AMR)it becomes pertinent to search for an antimicrobial alternative to cater for the imminent need to control total drug-resistant(TDR)and multiple-drug-resist...
This work was financially supported by the National Science and Technology Major Project of China(Grant No.J2019-Ⅶ-0002-0142);the National Natural Science Foundation of China(Grant No.52175333).
Hydraulic simulation is one of the critical methods to research the filling mechanism of molten metal in the casting process.However,it only performs on test pieces with relatively simple structures due to the limitat...
The mould electrical detection box is an innovative way of intelligent detection under the mould line. It simulates the production line to control the cylinder movement according to the production data parameters, and...
In Benin, the preservation of maize is a real problem involving important physical and chemical properties losses. Physical losses are due by rodents, pests and insects and chemical losses are mainly due to fungal inf...
KAIST UP programme,BK21+programme,Tomocube,and National Research Foundation of Korea(2017M3C1A3013923,2015R1A3A2066550,2018K000396).
A major challenge in three-dimensional(3D)microscopy is to obtain accurate spatial information while simultaneously keeping the microscopic samples in their native states.In conventional 3D microscopy,axial resolution...
Capnodium berberidis,a sooty mould fungus,previously reported only from Pakistan in 1978,was recently observed on Berberis lycium in Jot Pass,district Chamba of Himachal Pradesh,India.Berberis lycium is a well-known s...
Beijing Everest Green Building Technology Ltd. for the funding
This study proposes an innovative precast shear wall system, called an EVE precast hollow shear wall structure (EVE-PHSW). Precast panels in EVE-PHSW are simultaneously precast with vertical and horizontal holes. Nonc...
The manufacture by arc furnace technology of various fused metal oxides, such as for example fused zirconia, fused alumina-zirconia or brown fused and semi-friable alumina, affords furnace dusts as a byproduct. The pr...
Supported by the Jiangsu Agricultural Science and Technology Innovation Foundation(CX(15)1009)~~
[Objective] The aim was to provide reference for the production technolo- gy of cold fresh chicken. [Method] Lactic acid was used as the disinfectant in cooling water, so as to study the effect of disinfection time on...
Supported by Madhya Pradesh Council of Science and Technology,Bhopal(Grant No.3902/CST/R&D/2011).
Objective:To isolate yeasts and moulds from selected natural systems and study the effect of tetracycline(Tet)on them so as to generate comprehensive data for further elucidation of transfer or evolutionary developmen...